I love the Lowrance Elite-3X Fishfinder with 83/200 Transducer – it was most definitely one of my best purchases this entire year. So far, this fish finder has performed even better than I expected it to. In the package you will find a mounting bracket, a power chord, and the transducer. It’s a small and comfortable fish finder, so it’s not a burden to take everywhere with you.
The screen is amazing – even in direct sunlight, there is not a single problem reading it. With the 83 or 200 frequency transducer, it can be used in shallow or deeper waters which I think is great. The 200 frequency setting is generally best used anywhere as deep as 200 feet or shallower, while the 83 frequency setting can best be utilized in water deeper than 200 feet. This makes it easy to use in various bodies of water at different depths, it’s just a setting to switch between the two frequencies. The depth readout size is decent, and I can have it comfortable mounted at about 3 feet. The display is also coloured, making it even easier to see. I’m very glad that I went with this product!
The fact that I can use this fish finder on either a kayak, a powered boat, or even on a float tube makes it very versatile. I also can’t get over the price, this is most definitely the best Lowrance fish finder in the entire price range. It is lightweight, but durable. I’ve had it for somewhere around thirty days, and I haven’t had a single issue with it. I’ve taken it out with me seven times so far, in different locations. It has consistently performed well for me, and I couldn’t be more satisfied. Even the mount is manufactured with real quality materials, and works well.
The interface is extremely simple, and it is very easy to use. Once you get a hang of the fishfinder, it is not complicated.
It doesn’t use up to much energy either, which is the best on long trips. The battery lasts me full trips that are anywhere between five and twelve hours long, and with an automatic trickle charger it takes less than 10 minutes to charge it. It honestly would probably have absolutely no problem running for up to 20 hours straight.
It is very easy to set up, gives accurate depth and temperature. I’m probably going to have to buy another one to mount on my smaller kayak. It is so user friendly that I bought one for my good friend. He had never used a fish finder in his life, but after a week, he was teaching me how to change the settings.
Lowrance Elite 3X Features and Price
The screen is small, compact, but easy to see. Because the display is so clear, it can easily be seen even in bright daylight. The colors make it easy to see, and I have no problem reading the depth readout. I like the size of this particular fish finder because it fits well on my setup. There is no doubt that this Lowrance fish finder is the best you can find for under $*** dollars, and it might even be better than many significantly more expensive models.
As far as installation goes, it’s easy enough. I had no problem doing it myself, but if you might struggle with this, then I highly suggest you look it up online. There are several online manuals and videos with in depth instructions on how to properly install the transducer in order to minimize signal intermission. I appreciate the simplicity, but it’s best for you to fully understand the installation process – it brings the quality to new levels. Once you set up the entire fish finder, you should check the settings. Get familiar with the interface, the symbols, and the depth reader.
After you understand the fish finder and are familiarized with it, try it out on a small boat. Your first time should be interesting, but nothing too complicated. Battery is not an issue when going on long trips, and that’s one less thing to worry about. Even with the sharp, bright display, the fish finder doesn’t use too much energy. After you’re comfortable with the fish finder, then it is really simple. The Lowrance elite 3x is amazing for shallow saltwater, but it works wonderfully in deep water as well. The price is unbeatable, and it functions perfectly. I am really fond of the water temperature sensor being built into the transducer; it’s really clever and effective.
Here are My Tips
Some tips in order for you to be able to enjoy this wonderful product to the fullest; Remember to switch it out of simulation mode every time you turn the fish finder on. Look up the instructions for the installation. It is fairly simple to set it up on your own, but it is safer to make sure. Make sure that you switch the frequencies to match the depths that you are in (Again: The 200 frequency setting is generally best used anywhere as deep as 200 feet or shallower, while the 83 frequency setting can best be utilized in water deeper than 200 feet).
Try to avoid mounting the transducer in close proximity to the motor, as this may cause air bubbles and your signal will be reduced. Angle the transducer properly, and make sure it isn’t placed in an area that receives air flow that is not smooth.
Ultimately, you want to place your transducer in the area that receives the clearest water. If your transducer is mounted in this fashion and you adjust the frequency in relation to the depth of the water you are fishing in, then you should have a wonderful experience with this fish finder, just as my friend and I have. It is worth the cost. The quality is amazing, it is easy to navigate and operate, I can see the water temperature, and the fish finder is accurate. I absolutely recommend this product for any person who loves fishing and is looking for a well priced fish finder.